Sekonic Litemaster Pro L-478DR, Operating Manual, Page: 6 / 16

6
2
Measuring
2-1. Selecting the Channel and Zones
2-1-1. How to set in Standard System
1) Touch the Tool Box icon ( ) at the bottom right of the Measuring screen to display
the Tool Box screen.
2) Touch the
[Radio CH/Zone]
to display the Radio CH/Zone Setting screen.
3) Touch the STD tab for Standard Channel and Zones selection.
4) Touch the arrows
▲
/
▼
or slide your finger over the screen to select Channel from
1 to 32. When the channel number from 17 to 32 is selected, Zones (A, B, C, D)
appear.
5) Touch one or more Zones (A, B, C, D) to select the flash units you want to use.
* Zones to use can be selected from Power Control Screen as well.
6) Touch [OK] to confirm settings and return to the Measuring screen. (Touch [Cancel]
to go back to the Measuring screen without change.)
Radio CH/Zone Setting screen
(When Standard Channel is selected)
Measuring screen
Tool Box screen
Channel numbers
STD tab
Zones
•
Set both the meter and plug-in external or built-in PocketWizard receivers to the same Standard system.
•
The last selected Zones in either Power Control screen or Radio CH/Zone Setting screen in Tool Box are activated in
Measuring screen.