FIND PHONE:
• After the watch has been connected to your phone via Bluetooth,
selecting this option will cause the phone to vibrate and beep so that it
can be easily located.
• You can also access this option by swiping down from the home
screen.
SETTINGS
LANGUAGE:
• Set your language preference.
SCREEN DISPLAY:
• Change dial.
• Brightness – set the brightness of the watch screen.
• Screen time – set how long the screen stays awake for.
• Turn wrist wake – set how long the screen stays awake for when you
turn your wrist. This setting must be turned on within the app (gesture
control).
DO NOT DISTURB:
• Enter into do not disturb mode.
VIBRATION:
• Set the vibration level.
SYSTEM:
• System version – view Bluetooth name, software and UI version.
• Shut down.
• Reset – clear all data from the watch.
CHANGING THE STRAP
• The strap on your smartwatch is removable and interchangeable
with other 22mm watch straps.
• Turn the watch over and locate the quick release.
• Slide the quick release across to separate
the strap from the watch.
SAFETY AND CARE INSTRUCTIONS
INTERNATIONAL PROTECTION RATING (WATER RESISTANCE):
Your smart watch is IP68 rated, meaning it has complete protection
from the ingress of dust, and is protected from continuous immersion
in water up to a depth of 1.5metres for a maximum of 30 minutes.
Please note that salt water or certain chemicals in water may damage
or weaken the watch seals, especially with repeated exposure.
To ensure your watch stays in good functioning condition it is
recommended that you:
• Do not press the buttons while your watch is submerged.
• Do not use the watch when swimming, diving, or snorkelling.
• Do not attempt to charge the watch while it is wet.
Please note that the watch’s touch screen will not function while
submerged in water. If your watch is exposed to water, always dry it
fully with a soft cloth.
If your watch is exposed to any other liquids such as
salt water, swimming pool water, soapy water, perfume,
sunscreen, hand sanitiser, cosmetics, or other chemical
products; wash it with clean water and dry it fully with a
soft cloth.
The watch’s functionality may be affected if these
instructions are not followed.
• Do not attempt to disassemble your smart watch.
This may cause a safety hazard, could damage your
watch, and/or affect the water resistance.
• Do not use hair dryers, blowers, or any other heated
equipment to dry your watch. Don’t operate your watch near
radiators or heat sources. This could cause damage to your watch.
• Do not place heavy objects or exert strong pressure on your
smart watch.
• Avoid using the watch in extremely high or low temperature
environments.
• Avoid using the watch in high humidity environments. This could
affect the water resistance of the watch.
• Protect your smart watch from long exposure to direct sunlight.
Please note that the measurement results of this device are for
reference only and are not intended for medical use. Users should
always follow the advice of their doctor or other trusted medical
professional.
When using your smart watch on aeroplanes, in hospitals, or near
medical electronic systems please follow the authority standards
and be aware that wireless signals transmitted could impact the
functionality of sensitive electronics.
PRODUCT SPECIFICATION
Model
Sekonda
CPU
RTL8762C
ARM
Cortex-M0
53MHz
Memory
RAM 128KB + ROM 64Mb
Capacitive touch screen
1.4”square screen 240*240 screen
Bluetooth version
5.0
Battery
Lithium-ion
3.7V/160mAh
HOW TO UNPAIR YOUR SMARTWATCH FROM YOUR PHONE
• Open the app and navigate to the menu by tapping on the icon in
the top left of the screen.
• Tap on “Device” then “Unpair”. The app will ask if you wish to unpair
the watch. Tap “Action” to do so.
HOW TO RESTORE YOUR WATCH TO FACTORY SETTINGS
• To clear all data from your watch and restore it to factory settings please
swipe right on the home screen of your watch and navigate to “Setting”.
• In this menu select “System”, then “Reset”.
If for any reason you need to return your watch to us, please restore
your smartwatch to factory settings before sending it.
DAILY ACTIVITY:
• The watch will display the user’s total number of steps, the distance
walked, and calories burned for the current day. The data will be
cleared at midnight every day.
• You can also access the daily activity screen by swiping left from
the home screen.
TEMPERATURE:
• When this is selected, the watch will begin to measure your
temperature.
• The top measurement shows your surface skin temperature.
• The bottom measurement shows your body temperature. Your
watch will take 60 seconds to measure this.
• Please note that to accurately measure body temperature the room
temperature must be between 18-30°C.
HEART RATE:
• When this is selected, the watch will begin to measure your heart rate.
• The watch will vibrate when it has finished measuring.
MESSAGE:
• When connected to your phone via Bluetooth, notifications from your
phone will be sent to your watch. View new messages/notifications here.
• Make sure to accept the permissions for push notifications on your
phone for this to function correctly.
SPORTS:
• In this mode you can select from walking, running, climbing, riding or
basketball, to record data during the activity.
• Data that is recorded can include time, heart rate, steps and calories
burned, depending on which activity is selected.
• Press the lower button to end the recording of data.
SLEEP:
• The watch will display your total sleep time for the previous night,
including the total time of deep sleep and light sleep.
• The watch will measure sleep times between 21:30-12:00 the next day.
WEATHER:
• After your watch has been connected to the HitFit Pro app, it will
display local weather information.
• Scroll down to see weather for the upcoming week.
• To update the weather information, synchronise the watch with the
app. Please make sure location permissions are turned on within your
phone’s settings
MUSIC:
• With your phone connected via Bluetooth, music can be selected
through the watch interface.
• Volume of the music playing from your phone can be adjusted
through the watch interface.
RELAX:
• Select one minute or two minutes. Tap to start.
• The watch will guide your breathing for the duration of the time
selected.
TIMER:
• Tap to start the timer. Tap again to pause the timer.
