0000138014
rev. 1.0 EN
7
Paragraph 7 – Statistics
Programming
Operation
From the main menu, by pressing the
key you can
access the statistics:
- T.Pump = operating time of the pump.
- T.Tube = operating time since the last tube replacement.
- Q.Pump = quantity dosed by the pump in liters; this data is
calculated based on the memorized calibration value.
- Activations = number of pump activations.
- Alm.Meas = number of alarms relating to measure.
- Reset = use the
key to reset the counters (YES) or
otherwise (NO), then confirm by pressing
.
Press the
key to return to the main menu.
Paragraph 8 – Password
Programming
Operation
By setting the password, the programming section can be
accessed to view all the setup parameters, but every time
you try to change the settings you will be prompted for the
password.
The flashing line indicates the editable number; press
to select the number (from 1 to 9), then press
to select
the number to modify, and then press
to confirm.
By setting “0000” (default), the password will be eliminated.
PROG
Con
fi
g.
Stats
T.Pompa
T.Pump
0h12m
T.Tube
0h5m
Q.Pump
0,79l
Power
12
Reset
Reset?
Yes
Stats
T.Pompa
Alm.Meas
1
PROG
Con
fi
g.
Password
****
Password
0000
Summary of Contents for KRONOS 20 pH/ORP
Page 2: ...0000138014 Rev 1 0 ...
