background image

1

2 Piece Hood Rack - Installation Manual
Polaris General

Part Number #08074

Seizmik makes Windshields, Doors, Tops, Hood Racks, Mirrors, and other great accessories for utility vehicles & 
side x sides. Our products are engineered tough for long life and tested under the harshest of conditions.  

Always observe the warnings and precautions in this manual when using your Seizmik products.  For best results, 
carefully follow the instructions in this manual and make no modifications.

Seizmik products are designed, developed and manufactured by Vialink Corp.  If you have any questions, 
comments, need assistance, or are missing parts, please call 1-866-838-3366  between 9:00AM and 5:00PM 
EST.  You can email us at 

[email protected]

Summary of Contents for 08074

Page 1: ...er the harshest of conditions Always observe the warnings and precautions in this manual when using your Seizmik products For best results carefully follow the instructions in this manual and make no modifications Seizmik products are designed developed and manufactured by Vialink Corp If you have any questions comments need assistance or are missing parts please call 1 866 838 3366 between 9 00AM...

Page 2: ...s 2 M8 X 30mm Hex Head 4 M8 Flat Washers 2 M8 Lock Nuts 2 Metal Spacers 1 Assemble two sides of rack A Secure the larger rear tube with an M6 x 35mm Socket Head bolt and lock nut Secure the front smaller tube with an M6 x 30mm Socket Head bolt and lock nut 2 Insert an Extension Tube B in each end of the hood rack Push in just a few inches and tighten the locking bolt in the end of the tube just en...

Page 3: ...the two clamps E to the roll cage clamps G with two M6 x 16mm socket head bolts 4 washers and 2 nuts The clamp lever should open towards the front of the vehicle Front of Vehicle 4 Attach the two clamps E to the bumper mount F using 4 M6 x 16mm bolts 2 washers and 4 locknuts Make sure all clamp levers open towards the front of the vehicle Front of Vehicle 1 2 To open a clamp lift up on both levers...

Page 4: ...hicle together and use these bolts to bolt the roll cage mounts to the vehicle The clamps should open towards the cab of the vehicle 4 Open all four clamps and place basket assembly on the on the clamps Lock all four clamps 6 Adjust the hood rack angle by loosening the bolt on the front riser stems and pushing up or down on the front of the rack Adjust clamps and brackets as necessary then tighten...

Reviews: