floor fixing holes
(both sides of pan)
cistern/pan
attachment holes
seat connection holes
cistern outlet pipe hole
Important
1
Inspect the components
before installation
to ensure there are no visible defects. If a defect is found, do not install the toilet suite and contact the
supplier immediately. Claims for defects will not be accepted after the product has been installed.
2
This toilet suite is suitable for the following set-ups:
Cistern
— accommodates
Bottom entry inlet
connection (left or right stop valve).
Pan
— accommodates S-trap installation.
3
The toilet suite must be installed by a
licensed plumber
. Failure to do so may void the warranty.
1 x ceramic cistern lid
1 x ceramic cistern base
Cistern is supplied with flush
valve and bottom entry inlet
valve already installed.
2 x bolts w seals
For attaching cistern
to pan.
1 x plug
Only required if installing
back entry (BE) version.
1 x rubber seal
For sealing outlet at
base of cistern.
1 x flush button
Half flush left, full flush right.
1 x ceramic pan
2 x caps (white)
2 x floor screws (+ white plugs)
2 x pan plugs (white)
Optional fixing #2 — used to secure pan to floor. Plastic plug
is placed into hole at base of pan exterior; screw is rebated
into plug. Cap is used to cover plastic plug.
1 x seat and lid — soft closing
2 x plastic bolts
For securing seat to pan.
CIstern paCkage Contents
pan paCkage Contents
seat paCkage Contents
INSTALLATION GUIDE
mero CLose CoUpLeD toILet sUIte
Page 2 of 4 | seima.com.au
