-7-
Installation
Please clean the operation desk before installation.
Take the microscope out of the carton and put it on
the desk.
Make sure the supply voltage meets the instru-
ment’s requirement and the power switch is off.
Installation Instruction Fig.:
1. Turn the binocular (trinocular) head to working
position;
2. Remove the dust plugs of the eyepiece tube;
3. Insert the eyepieces into binocular head;
4. Install Abbe Condenser
3.1
Eyepiece Tube
Loosen the Head Thumb Screw G, turn the
tube to observing position, then tighten the
Screw G.
3.2 Remove the eyepiece dust plugs.
3.3 Eyepiece
Take the eyepieces out of the carton, and insert
into the tube. Please don’t touch the lens of the
eyepiece by hand.
3.4 Condenser
Factory Installed.
3.5 Power
Plug in power cord, turn on Switch L, and turn
Potentiometer J.
CONDENSER SCREW
CONDENSER
INSTALLING
RING
CONDENSER
