5
Unpack
Carefully unpack all components. Inspect all
components for any signs of damage, which
may have occurred during shipping.
If shipping damage is suspected, notify
Seiler Inc or your authorized Seiler
distributor immediately.
Charge the
unit before
initial use.
Plug the charger into the unit before plugging
into wall. Only use the supplied wall charger .
The module is fully charged when the GREEN
LED is no longer illuminated.
Note: The headgear LED will not illuminate
and can not be used during charging.
Install the LED
module onto
the surgical
glasses
Install the LED illuminator onto the surgical
glasses using the integrated mounting clip.
Make sure that the mounting clip bottom hole
slips over the small post on the bottom of the
glasses frame.
Photo shows the
mount clip pinched
between two fingers
to open the jaws.
Setup
