4
3. Remove the pole from the packaging and insert pole into the center post hole in the base. Align the two
indention marks in the pole to the holes in the base center post hole collar.
4. Once the pole is secured into the base, insert the Light Housing/Light Source portion of the microscope
into the top of the pole. This is where the illumination system is housed. Make sure that the light source is
secured while inserting the light source into the pole.
Once the pole is in the collar and indentions are
aligned, use the provided Allen Wrench to tighten
the two Allen bolts in the base center post collar to
secure the pole.
