Seiko SSE153J1 Complete User Manual Download Page 58

Page: 58 / 59

ASTRON 8X42 GPS SOLAR

FUNCTION LIST/SPECIFICATIONS

SPECIFICATIONS

Function for reception

Other functions

In-flight mode ( ) …………………………



P. 22

Function to prevent the GPS signal reception
function from working. Set this mode when
boarding an airplane, etc.

Satellite acquisition status display function …



P. 18

Displays by the second hand the number of GPS
satellite from which GPS signals are received
during GPS signal reception.

Reception result display function ………



P. 30

Displays the latest reception result (success/
failure).

Time zone setting check function ………



P. 21

Displays the currently set time zone

1. Basic function ……………………… Main-dial; three hands (hour/minute/second hands),

date, indicator hand, Dual time display function, 24
hour display, world time function (39 Time zones)

2. Frequency of crystal oscillator … 32,768 Hz (Hz = Hertz ... Cycles per second)

3. Loss/gain (monthly rate) ………… Loss / gain ±15 seconds on a monthly rate (When the

watch is used without an automatic time setting by
receiving GPS signal and when it is worn on the wrist
within a normal temperature range between 5°C and
35°C (41ºF and 95ºF)).

4. Operational temperature range … Between −10°C and +60°C (14ºF and 140ºF)

5. Driving system …………………… Step motor (hour/minute/second hands of main-dial),

big date calendar display, indicator hand, sub dial (hour,
minute).

6. Power source ……………………… Secondary battery, 1 piece

7. Duration of operation …………… Approximately 6 months (Fully charged, and the Power

Save is not activated).



If the Power Save is activated after it is fully charged,

the watch continues to run for approximately 2 years
at maximum.

8. GPS signal reception function … Time zone adjustment, manual time adjustment,

automatic time adjustment

9. IC (Integrated Circuit) …………… Oscillator, frequency divider and driving circuit C-MOS-

IC, 4 pieces

Dual time display function ………………



P. 24

The time of an area different from the time of the
main-dial is displayed with the sub-dial at the 6
o’clock position (12-hour) and the 24 hour hand.

Automatic hand position alignment function …



P. 44

Automatically corrects misalignment when the
hands are misaligned due to external factors such
as magnetic influence.

Automatic leap second reception function …



P. 29

Automatically receives leap second data when
leap second data reception is necessary.

Declaration of Conformity



The specifications are subject to change without prior notice for product improvement.

Summary of Contents for SSE153J1




























































Search results

Summary of Contents for SSE153J1

Reviews:

Related manuals for SSE153J1

Brands by name

Popular brands

Seiko SSE153J1, Complete User Manual

Search results

Summary of Contents for SSE153J1

Reviews:

Related manuals for SSE153J1

Brands by name

Popular brands