background image

11

English

English

10

SECURITY LOCK BUTTON OPERATION

Unlocking the push-buttons

-  Turn Security Lock Buttons counterclockwise until you no longer feel the threads turning.
-  The buttons can be pushed in.

Locking the push-buttons

-  Turn Security Lock Buttons clockwise until you no longer feel the threads turning.
-  The buttons cannot be pushed in.

 

Locking

 Unlocking

 Locking

A

B

SECURITY LOCK OF PUSH-BUTTONS A & B

 Unlocking

 

1. Before diving, make sure that both buttons are locked tightly in place.

 

2. Do not operate the buttons when the watch is wet or in water.

SETTING THE TIME AND

 

ADJUSTING 

THE STOPWATCH HAND POSITION

Minute hand

Hour hand

Unlock, and then pull out to the second click when the second hand is 

at the 12 o'clock position.

Turn to set the hour and 

minute hands.

Small second 

hand

1.  MAIN TIME SETTING

l

  This watch is designed so that the following adjustments are made with the 

crown at the second click position:

 

1)  main time setting

 

2)  stopwatch hand position adjustment

 

Once the crown is pulled out to the second click, be sure to check and adjust 

1) and 2) at the same time. 

CROWN

CROWN

Summary of Contents for SSC223P2




















Reviews: