Seiko MP-B30 Series User Manual Download Page 24

Page: 24 / 82

8. INSTALLING BATTERY PACK

To supply power to the printer, use the battery pack.

The AC adapter and car charger are only for charging. Even when the AC adapter or car charger is

connected to the printer, the printer cannot print without the battery pack.

For connecting the AC adapter, see "14 CHARGING BATTERY PACK".

And for connecting the car charger, see "16 CHARGING BY CAR CHARGER“.

The battery pack and AC adapter are included with the printer at the factory shipment, but they are also

available as optional accessories. See "20 SPECIFICATIONS" and "21 ACCESSORIES AND

CONSUMABLE PARTS", and be sure to purchase our specified accessories listed on these references.



Installing/Removing Battery Pack

NOTE

◆

Make sure to turn off the printer when installing/removing the battery pack.

◆

If the battery pack is removed while saving the registration data by registration
command or settings by function setting command, the data may be lost.

◆

When the printer is not used for a long time, remove the battery pack from the printer.

◆

See "2 SAFETY PRECAUTIONS" and "3 OPERATING PRECAUTIONS" for the
precautions of the battery pack.

Installing Battery Pack

The battery pack is installed to the printer in the direction as shown in Figure 8-1.

The battery pack cannot be installed if inserted in the wrong direction.

Figure 8-1 Battery Pack Orientation

Summary of Contents for MP-B30 Series



















































































Search results

Summary of Contents for MP-B30 Series

Reviews:

Related manuals for MP-B30 Series

Brands by name

Popular brands

Seiko MP-B30 Series, User Manual

Search results

Summary of Contents for MP-B30 Series

Reviews:

Related manuals for MP-B30 Series

Brands by name

Popular brands