14
Push the crown back in to the normal position in ac-
cordance with a time signal.
※ The telephone time signal service is helpful for setting the second
hand exactly.
○ The mechanism of mechanical watches is different
from that of quartz watches.
When setting the time, be sure to turn back the
minute hand a little behind the desired time and then
advance it to the exact time.
Normal
Position
First click
Second
click
CAUTION
16
How to use the chronograph(NE88)
The chronograph can measure up to 12 hours.
※ "Chronograph" refers to a watch function that measures the elapsed
time while indicating the current time.
※ Before using the stopwatch, be sure to check that the center stop-
watch hand is at "0" position. If not, press button Ⓑ to reset it to "0" po-
sition.
※ Before using the stopwatch, be sure to check that the watch is wound
up sufficiently. If the power reserve indicator indicates less than 10
hours of power reserve, the stopwatch cannot be used.
(Ex.: 6 hours 20 minutes 10 seconds)
Start/stop of the
stopwatch
Reset of the stop-
watch
Center stopwatch
hand
stopwatch hour
hand
stopwatch
minute hand
ButtonA
ButtonB
■ How to use the chronograph
15
■ Date adjustment at the end of the month
It is necessary to adjust the date at the end of February
and 30-day months.
Ex.) To adjust the date in the A.M. period on the first
day of a month following a 30-day month
・ The watch displays "31" instead of "1". Unscrew the
crown by turning it counterclockwise, and then, pull it
out to the fi rst click.
・ Turn the crown to set the date to "1" and then push
the crown back in to the normal position.
・ While pressing the crown, turn it clockwise until it
locks in place.
○ Do not set the date between 8:00 p.m. and 2:00 a.m.
as this will cause a malfunction.
CAUTION
17
[Standard measurement]
Press the buttons in the following order:A → A → B
(6 hours 20 minutes 10 seconds)
・ Press button A to
start the chrono-
graph. The center
stopwatch hand
will start moving.
・ Press button B to
reset the chrono-
g r a p h . A ll t h e
stopwatch hands
will be reset to "0"
position.
・ Press button A
again to stop the
chronograph.The
stopwatch hands
stop to indicate
the elapsed time.
ButtonA
ButtonA
ButtonB
START
STOP
RESET