background image

19

20

9

 

DST setting of the main-dial

3

 DST (Daylight Saving Time) is not automatically changed.

 ON/OFF of the DST (Daylight Saving Time) is not automatically changed  with operation of time zone adjustment/manual time zone selection. 

When traveling to a region where DST (Daylight Saving Time) is not  adopted from a region where it is adopted, turn off the DST (Daylight 

Saving Time)  setting. 

The indicator hand moves 

to indicate the current DST 

(Daylight Saving Time) setting.
The second hand moves to 

indicate the current time zone.

< When DST (Daylight Saving 

Time) setting is OFF >

Pull out the crown to the first click

Continue to press Button A  

(3 seconds) within 5 seconds 

after operation of 

2

The indicator hand moves  

to point to “DST (ON),” 

and the hour and minute 

hands advance by one 

hour.

DST (Daylight Saving Time) can be manually set.

 Turn ON DST (Daylight Saving Time)

Push the crown back in

 In the Lord Howe Island time 

zone in Australia, the time is 

advanced by 30 minutes while 

DST (Daylight Saving Time) is 

in effect. 

0 1 2

Pull out 

to the first 

click

0 1 2

Press for 

3 seconds

0 1 2

Push 

back in

Carry out steps 

 to 

 in the state where DST (Daylight  Saving Time) setting is ON.

In step 

, adjust the indicator hand to the “OFF” position  as shown in the figure at the right. 

The hour and minute hands return by one hour. 

 

Turn OFF DST (Daylight Saving Time)

1

The second hand returns to 

the time display mode. 

The indicator hand returns to 

the display of charging status.

Summary of Contents for Astron 8X53



















Reviews: