Seiko 6M15, Manual

Page: 6 / 22

4. Press “B” repeatedly to set the hour hand. It advances one hour with each press of
the button.
* The hand moves quickly if the button is kept pressed.
* The minute hand will not move if “B” is pressed.
* The 24-hour hand turns a full circle in 24 hours and moves correspondingly with
the hour hand. When setting the hour hand, check that the 24-hour hand is
correctly set.
5. Press “D”. The second hand will move to indicate “STD” (Standard Time) or “DST”
(Daylight Saving Time) on the bezel/dial. With each press of “D”, the second hand
indicates “STD” or “DST” alternately. If the daylight saving time is in use in your
area, set the second hand to “DST”, and if not, set it to “STD”.
* If the watch is left untouched for 5 seconds with the second hand indicating “STD”
or “DST”, it will automatically return to the city you have selected.
6. Push the crown back in to the normal position in accordance with a time signal. The
second hand returns to the 12 o’clock position and starts moving at one-second
intervals.
Notes:
1. Once the time of your area is set, the time of the other 21 time zones represented by
the cities on the bezel/dial will also be set automatically.
2. While the watch displays both standard and daylight saving times for all areas year
round, the user must check to see when each is in effect for the respective countries.
Checking of the time zone and daylight saving time
You can check which time zone is selected in the TIME mode and whether the set time
is daylight saving time or standard time.
• Turn the crown to set the mode indicator to “TIME” or “ALARM ON”.
[To check the city selected in the TIME mode]
1. Press “C”. The second hand points to the city you have selected in the TIME mode.
2. Press “C” again. The second hand returns to indicate the current second.
* If the watch is left untouched with the second hand pointing to the selected city,
it will automatically return to indicate the current time in 5 seconds.
[To check whether the standard time or daylight saving time has been set]
1. Press “D”. The second hand points to “STD” if the set time is the standard time, and
“DST” if the set time is the daylight saving time.
2. Press “D” again. The second hand returns to indicate the current second.
* If the watch is left untouched with the second hand pointing to “STD” or “DST”,
it will automatically return to indicate the current time in 5 seconds.