11
N
Initial Setup
•
Connect one end of an RF coaxial cable (not supplied) to the aerial socket
in your wall. Connect the other end of the cable to the RF (
75Ω
) socket in the
bottom connection panel on the back of the TV.
•
Attach all other devices to the TV following instructions.
•
Connect the TV's mains cable into a wall socket and turn the power on if
required.
•
In standby mode, press the button on the main unit or on the remote control
to turn the TV on. The red LED indicator will turn blue.
•
The first time you turn your TV on it will go straight to the Welcome screen.
Press the
EXIT
button to go to the No Signal screen.
•
After pressing the
OK
button you will go to the First Time Installation menu.
GENERAL OPERATION
(Local Rates Apply)
