34
TROUBLESHOOTING
The audio function does not work
Picture OK but no sound
•
Press the VOL +/- buttons.
•
Sound muted? Press the MUTE button.
•
Try another channel. The problem may be caused by the
broadcaster.
No output from one of the
speakers
•
Adjust the Balance settings in the SOUND menu.
Unusual sound from inside
the TV
•
A change in ambient humidity or temperature may result in
an unusual noise when the TV is switched on or off and does
not indicate a fault with the TV.
No sound when connecting
HDMI
•
Check if the input source is HDMI1/HDMI2/HDMI3.
Audio noise
•
Keep the RF coaxial cable away from the other connected
cables.
Password
Lost password
•
Select the Enter Password in the LOCK Systerm menu,
then enter the following master password"8899". Then you
can set a new password though the New Password option.
There is a problem in PC mode
The signal is out of range
(invalid format)
•
Adjust the resolution, horizontal frequency, or vertical
frequency.
Vertical bar or stripe on
background and Horizontal
Noise and Incorrect position
•
Screen color is unstable or
show a single color
•
Check the signal cable.
•
Reinstall the PC video card.
Should you need to replace the plug; the wires in
the power cable are coloured in the following way:
Blue – Neutral ‘N’
Brown – Live ‘L’
As the colours of the wires in the power cable
may not correspond with the coloured markings
identifying the terminals in your plug, and proceed
as follows:
The blue wire must be connected to the terminal
that is marked with the letter N.
The brown wire must be connected to the terminal
that is marked with the letter L.
If the power lead is damaged, it must be replaced by
Plug replacement - UK and Ireland only
Connect
blue lead
to ‘N’ -
Neutral
Connect
brown lead
to ‘L’ - Live
N
L
5
