Seiki SC-9060AU9FLC Instruction Manual Download Page 4

4

Read this manual thoroughly before you start using the Front Load Washing 
Machine. The safety precautions instructions reduces the risk of fire, electric 

shock and injury when correctly complied to. Please follow all instructions and 

take notice of all warnings.

ELECTRICAL SAFETY

• 

Voltage: 

Plug the appliance to a 220-240V, 50Hz, properly earthed power  

  outlet, it must be in good working order. 
• 

Power connection:

 Do not use an adaptor or an extension cord.  

  Plug the power plug directly into a separate power point that cannot be accidentally 
turned off, and that is easily accessible so you can switch it off if needed.

• 

Power cord:

 Do not kink or damage the power supply cord. Make sure it is behind  

  the appliance so no one can step on or place anything on the power supply cord or  
  against it. A damaged power plug may overheat and cause a fire.
• 

Damaged cord: 

Do not use a cord that shows cracks or damage. Any damage  

  to the cord may cause a short circuit, fire and/or electric shock.  
  Contact our support centre on 1300 296 699 for advice

 Disconnection:

 Never pull the power cord to unplug appliance.  

  Grip the plug and pull straight out from the power point.
• 

Electrical work:

 If the installation of this appliance requires any electrical work,

  make sure it is carried out by an electrician.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.

Pay close attention to messages that follow this safety alert symbol or the words 

DANGER

WARNING

 or 

CAUTION

. These words will be used to alert you of potential hazards that and 

injure you and others. Following these instruction will tell you how to reduce the chance of 
injury and the possible dangers if  
instructions aren’t followed.

This symbol indicates when there is a serious risk of 
injury if you do not pay attention to the warnings.

WARNING

CAUTION

This symbol indicates when to be careful to  
avoid a serious risk of injury to oneself or  
damage to property.

IMPORTANT INFORMATION

GENERAL SAFETY

Summary of Contents for SC-9060AU9FLC






























Reviews: