Seiki SC-7300AUEO, Instruction Manual

Page: 13 / 28

13
ELECTRICAL CONNECTION
• Before connecting oven, make sure supply voltage corresponds with your
mains supply voltage.
WARNING!:
This appliance must be earthed.
• This appliance comes pre-terminated with supply cord and plug.
Below connection information is for reference only.
• Means for disconnection must be incorporated in the fixed wiring in accordance
with the wiring rules.
• Allow disconnection of the appliance after installation, by accessible plug or a
switch in the fixed wiring.
PLEASE CONTINUE TO
NEXT PAGE (PG. 13) for
further instructions.
To connect the oven power cord,
remove the cover on the terminal
block, in order to gain access to the
contacts inside.
Make the connection, securing the cord in
place with the cable lamp provided and
then immediately close the terminal block
cover again.
INSTALLATION (Cont.)