Seiki SC-70AU6DR, Instruction Manual

Page: 10 / 20

10
Before installing your appliance, read all safety instructions in this manual,
especially the sections on electrical safety and installation.
INSTALLATION
• This clothes dryer can be installed on the floor (as supplied), or wall mounted.
• This appliance can not be installed behind a lockable door, sliding or a door
with a hinge on the opposite of the clothes dryer. In all ways that full opening of
clothes dryer door is strictly not allowed.
• Make sure that all electrical connections are made by qualified technicians and
all instructions in this manual are observed.
• Place the dryer in a dry, well ventilated area, away heat and direct sunlight.
• Exhaust air must not be discharged into the flue which is used for exhausting
fumes from appliances burning gas or other fuels.
• Make sure to allow 10cm of spacing behind the dryer to the wall.
GETTING STARTED
LEVELLING THE APPLIANCE
• Make sure to position the dryer is on a level and stable ground. If the floor
is uneven you can adjust the feet by twisting it as if to screw in the feet to the
product, either clockwise or counter-clockwise to adjust the feet up or down
until appliance is completely level.
NOTE: The Dryer will not work correctly unless it is positioned perfectly level.
• Do not install the dryer in a place that can easily be reached by rain
• Do not place the back of the dryer near curtains.
• Do not place the dryer near gas or flammable areas.