Seiki SC-6000AURH, Instruction Manual

Page: 15 / 20

15
After the rangehood has been properly installed, insert the power plug into
an appropriate electrical outlet and let the unit run for a few minutes prior to
using it while cooking.
TURNING OFF AND ON
• Determine where in the top cabinet you want to install the rangehood,
then drill 4 holes of Ø4mm at the bottom of the hanging board of
your cabinet.
NOTE:
• The rangehood will only operate once the slide-out rail is pulled outwards
towards the kitchen.
• Close the front panel and the rangehood will stop working.
• The next time the front panel is pulled back out, the rangehood will start
working at the previously set level.
This switch turns the rangehood lights either on or off.
I Turns the rangehood lights ON.
O Turns the rangehood lights OFF.
This button switches the rangehood on and toggles between the fan
speed settings:
HIGH, LOW, OFF.
= Turns on the fan motors to HIGH speed for maximum extraction.
O
Turns off the fan motors for no extraction; the rangehood
is switched OFF.
– Turns on the fan motors to LOW speed for minimum extraction.
INSTRUCTIONS