5
GENERAL SAFETY INSTRUCTIONS (Cont.)
ELECTRICAL SAFETY
•
Voltage:
Plug the appliance to a 240V ~ 50Hz, properly earthed power outlet, it
must be in good working order.
•
Power connection:
Do not use an adaptor or an extension cord. Plug the power
plug directly into a separate power point that cannot be accidentally turned off, and that
is easily accessible so you can switch it off if needed.
•
Power cord:
Do not kink or damage the power supply cord. Make sure it is behind
the appliance so no one can step on or place anything on the power supply cord or
against it. A damaged power plug may overheat and cause a fire.
•
Damaged cord:
Do not use a cord that shows cracks or damage. Any damage to the
cord may cause a short circuit, fire and/or electric shock. Contact our support centre
on 1300 296 699 for advice
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard
•
Disconnection:
Never pull the power cord to unplug appliance. Grip the plug and
pull straight out from the power point.
•
Electrical work:
If the installation of this appliance requires any electrical work,
make sure it is carried out by an electrician.
To reduce risk of fire, electric shock or injury, always follow these basic precautions and
accident prevention measures when using this appliance, including the below:
NOTE:
This appliance should be installed by an authorised technician else warranty
will be void.
INSTALLATION
• The product is heavy, be careful when moving it. To avoid back or other injury, have 2
people lift or mechanical aid when installing.
• When unboxing, thoroughly inspect the appliance carefully for any damage. If there
is any damage, do not install the appliance. Contact our support centre on
1300 296 699 for advice.
• While installing the appliance make sure that the power cord is not bent or flattened.
• Make sure to remove all packaging materials such as foams and tapes before
installing the appliance.
• Make sure if the machine is to be placed on carpet that the ventilation openings in
the base are not obstructed
• Install the washing machine on a flat level and stable ground.
• Allow for 20mm of space on all sides of the washing machine.
• The openings shall not obstructed by carpet.
• This appliance is intended to be used in household and similar applications such as
-
Staff kitchen areas in shops, offices and other working environments;
-
Farm houses
-
By clients in hotels, motels and other residential type environments;
-
Bed and breakfast type environments;
-
Areas for communal use in blocks of flats or in launderettes.
