5. Control interface introduction
1) RVC-100D main page
Connect the RD port of MATRIX-A8 to the In port of RVC-100D . After the
MATRIX-A8 has successfully recognized and connected to the RVC-100D,
the indicator on the lower left will flash, the device address MATRIX-A8
assigned to the RVC-100D also will be displayed.
You can enter four sub-pages respectively by click the corresponding
buttons on the main interface, namely "Output Setting" "Input Setting"
"Scene Setting" "System Setting".
2) RVC-100D sub-pages
- 3 -
