Seidio G2500, User Manual

Page: 12 / 17

11
Speaker Function (For G2500 GPS
Ready Mount with speaker only)
The speaker function enables users to listen to GPS
voice commands, digital books, and MP3 music over the
noise of the road through the built-in high performance
speaker.
Step 1:
Slide your PDA in the cradle.
Step 2
: Plug the car charger connector into the cradle
then to the 12V port in your car to operate the G2500
Mount.
Step 3:
Connect the audio cable from the headphone
jack on the PDA to the speaker jack on the cradle, which
is located on the top left corner of the cradle.
Step 4:
Adjust the volume to your desired level by
using the volume control on the left side of the cradle.
Step 5:
Play music or other voice programs on your
PDA..
Make sure the volume level will not disturb you when