SAFETY INFORMATION
Please read and undersand this entire manual before attempting to assemble,operate or install
the product.If you have any questions regarding the product,please call customer service at
800-633-5096 or in dallas 972-869-0111/ 9am - 4pm Mon-Fri.
WARNING
．
Products is heavy and should be assembled near its desired location.
．
It is recommended that two people move the finished product to prevent injury.
PREPARATION
Before beginning assembly of product ,make sure all parts are present.Compare parts with
package contents list and hardware contents above.If any part is missing or damaged,do not
attempt to assemble the product.Contact customer service for replacement parts.
Estimated Assembly Time: 60 minutes
Tools Required for Assembly:Phillips Screwdriver(not included)
ASSEMBLY INSTRUCTIONS
Insert cam lock (C) into corresponding
holes on small central pilasters (7L&7R)
Make sure the arrow points towards the
hole of the edge.Screw cam bolt(B)and
insert wood dowel(A) into corresponding
holes on front upper panel ( 5 ) & front
lower panel ( 6 ).
Attach the front upper panel and lower
panel to the small central pilasters and
then tighten them with phillips head
screwdriver (not included) by turning the
cam lock clockwise until engaged with
the cam bolt as the figure shown.
Hardware Used
Wood Dowel X6
4
Cam Bolt X4
Cam Lock X4
1
A
C
B
C
C
C
A
B
A
Summary of Contents for FA966800TX
Page 2: ...PACKAGE CONTENTS 2 ...
