Administration Methods
TPR User Manual
22
2.3
Administration via Email
You can administer the TPR via email and thus via any computer
with Internet access.
Functionalities
An email allows you to
• send TPR status information
• specify TPR parameters or
• perform an update on the TPR.
Requirements
A DNS server has been configured on the TPR; see:
In order to receive emails, the TPR must be set up as user with its
own email address on a POP3 server.
POP3 and SMTP parameters have been configured on the TPR;
see:
Sending Instructions
via Email
If you want to administer the TPR, you must enter the relevant
instructions into the subject line of your email.
Proceed as follows:
1. Open an email program.
2. Write a new email.
3. Enter the TPR address as recipient.
4. Enter an instruction into the subject line; see: ’Syntax and
5. Send the email.
The TPR receives the email and carries out the instruction.
Syntax and Format
of an Instruction
Note the following syntax for instructions in the subject line:
cmd: <command> [<comment>]
