Hardware Installation Guide
17
A status page can only be printed if the printer supports ASCII, PostScript,
DATAMAX (label printer), or the Citizen-Z (label printer) format.
Connect the print server to the printer
Proceed as follows:
1.
Turn the printer off.
2.
Disconnect the printer's power cord.
3.
Remove the data cable (Parallel or USB) connecting the printer
to the computer.
4.
Connect the data cable (Parallel or USB) to the print server.
Connect the print server to the network
Proceed as follows:
1.
Connect the network cable (RJ-45) to the print server.
2.
Connect the power pack's power cord to the print server.
3.
Connect the printer's power cord to the printer.
4.
Turn the printer on.
5.
Press the status button of the print server in order to print out
a status page.
