SEH primos, User Manual

Page: 71 / 78

primos User Manual Appendix
67
8 Appendix
What
Information Do
You Need?

’Glossary’

67

’Troubleshooting’

69

’Index’

72
8.1 Glossary
This glossary contains information about manufacturer-specific software solutions and
terms from the world of network technology.
What
Information Do
You Need?
Manufacturer-Specific Software Solutions
• ’primos Control Center’

68
• ’SEH primos App’

68
Network Technology
• ’Default Name’

67
• ’Gateway’

67
• ’Hardware Address’

68
• ’Host name’

68
• ’IP Address’

68
• ’Subnet Mask’

68
Default Name The primos default name is made up of the two letters 'IC' and the device number. The
device number consists of the last six numbers of its hardware address.
Example: IC0001ff
The default name can be found in the primos Control Center.
Gateway Using a gateway, you can address IP addresses from other networks. If you want to use a
gateway, you can configure the relevant parameter via the primos Control Center
(

13).
The appendix contains a glossary, trouble shooting information and the
index of this document.