SEH IH-304, User Manual

Page: 6 / 40

2 [en] User Manual

Purpose
The industrial solution IH-304 is a USB hub. The device has
four USB 3.0 ports. They can be used to charge USB devices.
The IH-304 is connected to a client via the USB interface.
Alternatively, the IH-304 can be connected to an industrial
USB Deviceserver 'INU-100' by SEH Computertechnik GmbH.
This way, the USB devices which are connected to the IH-304
can be accessed via a TCP/IP network or the Internet. More
details can be found in the chapter ’Associated Products’

2.
The IH-304 has been developed for industrial environments. It
is mounted on a top-hat rail, e.g. in a control cabinet. The
integrated overvoltage protection guards the connected USB
devices against too high voltages (e.g. from faulty power
supplies or lightning strikes).
Associated Products
Industrial solution 'INU-100 USB Deviceserver'
The INU-100 allows you to access non-network-ready USB
devices such as the IH-304 in the network (virtual USB cable
extension). To do this, the IH-304 is connected to a USB port
of the INU-100. The access is controlled via the software tool
‘SEH UTN Manager‘.
The INU-100 must be purchased separately. Detailed
information:
http://www.seh-technology.com/products/
industrial-solutions/inu-100.html