Device Settings
myUTN User Manual Windows
54
UTN SSL Port
Encrypted connection means that client and UTN server communi-
cate via the UTN SSL port. The port number 9443 is preset. In order
to use an encrypted connection you must enable the port encryp-
tion; see:
This UTN port or the UTN SSL port must not be blocked by a firewall.
If required, you can change the port number on the UTN server.
Requirements
In order that the SEH UTN Managers installed on the clients
receive the current port number, the 'SNMPv1' parameter must
be activated; see
Proceed as follows:
1. Start the myUTN Control Center.
2. Select
DEVICE – UTN port
.
3. Enter the port number into the
UTN port
or
UTN SSL port
box.
4. Click
Save
to confirm.
The settings are saved.
4.5
How to Assign a Name to a USB Port
You can assign any name to the USB port. This port name will be dis-
played in the myUTN Control Center and the SEH UTN Manager. If
no port name is defined, the name of the USB device connected will
be displayed.
Tip
Some USB devices have cryptic or ambiguous names. Assign a clear
description, e.g. the name of a corresponding software, to the USB
port and thus the USB device. This gives you a better overview of the
USB devices available in the network.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select
DEVICE – USB port
.
3. Enter the preferred name into the
Port name
field.
4. Click
Save
to confirm.