Removal Instructions
Step 1
Remove the fastener at the end of
the handlebar on the steering grip
side using a 5mm hex wrench.
Step 2
Slide the fixed steering grip and
steering grip control off of the
handlebar.
Step 3
Orient the new steering grip control
so that the raised contour is facing
up and toward the front of the unit,
and the key on the inside opening
aligns with the groove on the
handlebar, and slide the grip all the
way on.
Step 4
Orient the fixed steering grip so the
key on the inside opening aligns with
the groove on the handlebar, and
slide the grip all the way on.
Step 5
Thread in the new fastener and
torque to 6.8 N-m with a 5mm hex
wrench.
>
Installation Instructions
>
Note
Replace all old components, including
fasteners, with the materials included
in this kit.
17439-00001ab
Questions?
If you are missing a part, or if you need to return the product please contact Segway Customer
Operations at 866.4SEGWAY (866.473.4929) or on our website at
www.segway.com/support/contact_us.html.
?
LIMITED WARRANTY
The Segway HT Steering Grip Kit is a Replacement Part covered by the Segway
TM
Human
Transporter Replacement Parts Limited Warranty (copy delivered with this kit).
