Segway Personal Transporter i2, Parts Replacement Manual

Page: 61 / 126

Segway® Personal Transporter i2, x2, x2 Turf Parts Replacement Guide 7 ‐ 3
Figure 7 ‐ 1: Serviceable Power Base
Establishing a Serviceable Power Base
The serviceable power base is the launch point
for many service procedures. Throughout this
guide, you will be instructed to “establish a
serviceable power base,” which means to
remove (or reassemble) the following
components from the Segway PT:
•
LeanSteer frame ( qty 1) ( page 1 ‐ 5 )
•
Mat ( qty 2) ( page 2 ‐ 3 )
•
Battery packs ( qty 2) ( page 3 ‐ 3 )
•
Tire/wheel assembly ( qty 2):
-
Model i2, page 4 ‐ 3
-
Model x2, page 4 ‐ 4
-
Model x2 Turf, page 4 ‐ 5
•
Fender ( qty 2)
-
Model i2 ( page 5 ‐ 2 )
-
Model x2 ( page 5 ‐ 4 )
•
Power base trim ( qty 2)
-
Front and rear fascia ( page 6 ‐ 4 )
-
Gearbox cover trim ( page 6 ‐ 5 )
•
Console trim ( page 6 ‐ 6 )
In many cases, the serviceable power base will
be used as a replaceable module. Note that the
unit serial number and Wireless InfoKey
controller are associated with the serviceable
power base.