5
‐
2
Segway®
Personal
Transporter
i2,
x2,
x2
Turf
Parts
Replacement
When to Replace
You
need
to
replace
a
fender,
for
reasons
that
include,
but
are
not
limited
to,
if
it
is
cracked
or
otherwise
broken.
FASTENERS
•
Use only Segway-approved fasteners.
•
Do not tighten or reuse any fastener except the screws used to
attach the battery packs, wheel nuts, and LeanSteer frame.
Instead, when any other fastener is loose or removed, replace
the fastener with a new Segway-approved fastener. See
•
Before using a fastener, make certain the fastener is the
correct size and type with any necessary washer and thread
on page C-1).
•
Since the pre-applied thread lock compound is intended for
single use only, reuse of fasteners is not permitted with the
exception of the wheel nuts, battery fasteners, and LeanSteer
clamp bolt.
•
Do not attempt to repair any stripped or damaged screw hole.
Instead, replace the part. If replacement part is not available,
do not reassemble.
•
Insert fasteners slowly and carefully. Do not cross-thread or
over-tighten fasteners. Tighten only to the prescribed torque.
•
Failure to adhere to these warnings could lead to serious injury
or death or damage to property.
