Segway-Ninebot G30M, User Manual

Page: 4 / 13

04 05
3 Diagram 2 Packing List
Dashboard & Power Button
Battery
Compartment
Hub Motor
Rear Light &
Brake Light
Buckle
Dashboard & Power Button
Electronic Throttle
Rear Fender
Quick Release Lever
Kickstand
Folding Mechanism
Front Fork
Stem
Drum Brake
Charge Port
Handlebar
Brake Lever
Bell
Snap Hook
Headlight
Speedometer: It displays the current speed of the KickScooter, as well as to display error codes.
Modes: Three modes available. "ECO" for Energy saving mode (smooth acceleration, suitable for beginners), "D" for Standard
mode and "S" for Sport mode (powerful, only recommended for skilled riders).
Bluetooth: It indicates that the KickScooter has been successfully connected to the mobile device.
Error: It indicates that the KickScooter has detected an error.
Battery Level: The battery power is indicated by 5 bars, each representing approximately 20% of a full battery.
Power Button: Press the button to turn the KickScooter on; and press and hold the button for 3 seconds to turn the KickScooter off.
When the KickScooter is on, press the button to turn the headlight on/off, and double press to switch between modes.
Pedestrian mode: Max. speed is 6 km/h. * How to enable in App: Tap the slide menu > Settings > Pedestrian Mode .
Temperature Warning: The thermometer icon always on indicates that the battery temperature has reached 50°C or is below 0°C.
* At this point, the vehicle cannot accelerate normally and may not be charged. Do not use it until the
temperature has reverted to the normal range.
When unpacking your KickScooter, please verify that the above items are included in the package. If you are missing any
components, please contact your dealer/distributor or nearest service center (see Contact in the user manual). After
verifying that all components are present and in good condition, you can assemble your new KickScooter.
Please retain the box and packaging materials in case you need to ship your KickScooter in the future.
Remember to power off your KickScooter and unplug the power cord before assembling, mounting accessories, or
cleaning the mainframe.
Accessories
User Materials Assembled KickScooter
QUICK START USER MANUAL LIMITED WARRANTY
Power Cord
M5 Flathead Screw × 6 Hex Wrench
Battery Charger
(Sold Separately)
Valve Stem Extension