Sega World Series Baseball Super Major League, Owner'S Manual

Page: 28 / 45

24
FIG. 11 b
CRADLE
7. COIN SELECTOR
The coin selector should be cleaned once
every 3 months. When cleaning, follow the
procedure below:
Turn the power for the machine OFF. Open
the coin chute door.
Open the gate and dust off by using a soft
brush (made of wool, etc.).
Remove and clean smears by using a soft
cloth dipped in water or diluted chemical
detergent and then squeezed dry.
Remove the CRADLE.
When removing the retaining ring
(E ring), be very careful so as not to bend
the rotary shaft.
Remove stain from the rotary shaft and
shaft receiving portions by wiping off with
a soft cloth, etc.
After wiping off as per above, further
apply a dry cloth, etc. to cause the coin
selector to dry completely.
CLEANING THE COIN SELECTOR
COIN INSERTION TEST
Once every month, when performing
the Coin SW Test, simultaneously
check the following:
Does the Coin Meter count
satisfactorily?
Does the coin drop into the Cashbox
correctly?
Is the coin rejected when inserted
while keeping the Reject Button
pressed down?
Remove and clean smears by
using a soft cloth dipped in water
or diluted chemical detergent and
then squeezed dry.
Never apply machine oil, etc. to
the Coin Selector.
After cleaning the Coin Selector,
insert a regular coin in the normal
working status and ensure that the
Selector correctly functions.
FIG. 11a
FIG. 11 c
GATE
Insert a coin
while keeping the
Reject Button
pressed down and
check if it is
rejected.
COIN METER
HANDLING THE COIN JAM
STOP
IMPORTANT
5
1
2
3
4
5
6
If the coin is not rejected when the REJECT button is pressed, open the coin chute door
and open the selector gate. After removing the jammed coin, put a normal coin in and
check to see that the selector correctly functions.