40
DEFAULT SETTING
Reset all the adjusted value to default value.
CONTROLLER CALIBRATION SETTING screen
DEFAULT SETTING screen
■Control
1.When the controller crosshair can’t calibrate to proper position, it is allowed to set to
default through CONTROLLER CALIBRATION SETTING.
2.Select “DEFAULT SETTING” in CONTROLLER CALIBRATION SETTING screen and press
test button to go to DEFAULT SETTING screen. “COMPLETED” will be displayed to indicate
the controller calibration setting has been resumed to default, and press test button to leave
the screen.
※
Each time the DEFAULT SETTING is executed, CALIBRATION START need to be executed
again to make sure the crosshair position is correct.
10
.
G
A
M
E
T
EST
M
OD
E
http://op.sega.jp/op_e/
Summary of Contents for Transformers Human Alliance
