Sega SEGA RALLY CHAMPIONSHIP TWIN TYPE, Owner'S Manual

Page: 15 / 106

12
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
Move the machine to the installation position.
Attach the joint plate for the two internal leg
adjusters prior to causing all of the leg adjusters
to make contact with the floor. By using a
wrench, make adjustments in the height of the
leg adjusters to ensure that the machine's
position is level.
After making adjustments, fasten the leg
adjuster nut upward and secure the height of the
leg adjuster.
This machine has 8 each of casters and adjusters (shown below). When the installation position is determined, cause
the adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be
raised approximately 5mm. from the floor and make sure that the machine position is level.
Be sure to have all the Adjusters make contact with the surface. Un-
less the Adjusters come into contact with the surface, the Cabinet
can move of itself, causing an accident.
3
3
2
1