S T - 1 7 4 - R 2 - 0 9 0 2 9 4
SEGA Enterprises, Ltd.
(RDJ, 7/18/94)
20
2.4 Connecting the EVA Board
For more details on removing the cover on Target Box, the main board and the
SH-2 board, see “ICE Connection" in this chapter.
Removing the Main Unit’s Cover on the Target Box
(1) Check to make sure that power from all peripherals connected to the Target Box
is off.
(2) Remove the main cover on Target Box.
(3) Loosen the screws of the ICE/EVA board / SH-2 board plug port cover and
slide downward.
Removing the SH-2 Board
If an SH-2 board is mounted to the SH-2 board / EVA board connector of the EVA
board connection side, remove the SH-2 board from main board, and the power
cable from SH-2 board CN3.
Before installing the EVA board, make sure the attached ICE PGA plug is not
installed to the installing side PGA socket. Then proceed with the board installation.
Otherwise, PGA plug could contact the EVA board bottom.
