ASSEMBLY AND INSTALLATION
23
6
Make sure that all the adjusters contact the floor. Otherwise the cabinet could
move, causing an accident.
The product comes with castors attached at 4 locations and adjusters at 8 locations.
When the installation site has been determined, have the adjusters come in direct contact with the floor. Establish a
gap of about 5 mm between the floor and the casters and adjust the unit so that it will remain level.
6-6 FIXATION TO INSTALLATION SITE
CASTOR (4)
ADJUSTER (8)
1
Move the product to the installation site. If the product is to be installed near a wall, secure enough passage-
way space for players to access the seat. You must also secure a 15cm space between the back wall and the
back of the cabinet for ventilation.
2
Bring the adjusters into direct contact with the floor. Use a wrench to align the height of the adjusters until
the cabinet is perfectly level.
3
After setting, turn adjuster nuts upwards to tighten them and secure adjuster heights.
