Sega Magical Truck Adventure, Owner'S Manual

Page: 58 / 105

53
9 - 3 MITSUBISHI PROJECTOR
Press the TEST KEY to have the red line adjust-
ment screen appear.
Superimpose the red cross on the green cross at
the center of the screen.
Move the red cross to the left, right, up, and down
respectively with the corresponding arrow keys of
the remote control.
When the red cross is superimposed on the green
cross, the green cross turns into yellow or white.
Press the R/B Key to have the blue line adjustment
screen appear. Each time R/B Key is pressed, the
red line and blue line will be alternated.
In the manner similar to #2 above, press each key
to superimpose the blue cross on the green cross.
When it is superimposed, the cross in the center
will become white.
Press the TEST KEY to exit from the adjsutment
mode.
During the STATIC CONBVERGENCE ADJUST-
MENT MODE, if no action is taken within 5
minutes, the ADJUSTMENT MODE will be
exited automatically.
STATIC CONVERGENCE ADJUSTMENT
Although Remote Control Buttons other than those specified below do not
function even if pressed during Convergence Adjustment, do not press them
during adjustment work so as to avoid causing malfunctioning.
Operate the Remote Control towards the PTV screen. If directed other than
to the PTV screen, the Remote Control does not function
.
Red line Adjustment
Press SHIFT to superimpose
the red line on the green line.
Completion of Adjustment
When adjusting MITSUBISHI PROJECTOR, use the Remote Control.
1
2
3
4
5