Follow the precautions shown below when using the
Microphone. Failure to follow these precautions may result
in damage to or malfunction of the Microphone.
●
Do not subject the Microphone to strong impacts.
●
Do not apply strong force to or bend the Microphone stand in any way.
●
Use only the microphone (Microphone stand) provided with this Microphone. Do not
connect or use any other microphones.
●
Do not swing or twirl the Dreamcast controller when peripherals like the Microphone
are connected. Do not leave the Dreamcast controller unattended when the
Microphone is connected.
●
Before wiping dirt off the Microphone: 1. Turn off the Dreamcast, 2. Remove the
Microphone from the expansion socket on the Dreamcast controller, 3. Clean the
Microphone with a soft, dry cloth.
●
Do not use or store the Microphone in an area that is very hot, cold, smoky, dusty,
humid, or in an area where there is water, such as near a sink or a tub.
●
If the Microphone is brought into a heated room from outside on a cold day, the
sudden temperature change may cause condensation to form inside the
Microphone. Always allow one hour for the Microphone to become acclimatized to a
new environment when moving it from a cold to a warm environment.
●
The Microphone should be used in the following environmental conditions:
Temperature: 41°F to 95°F; humidity: 10% to 80% RH (with no condensation)
FCC Warning
This device complies with Part 15 of FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference that may be received, including
interference that may cause undesired operation.
About the Microphone
Please read the following explanation before connecting the Microphone to the
expansion socket on the Dreamcast controller.
●
The Microphone can only be used with supporting software. Also depending on the
supporting software, some functions of the Microphone may not be available. Please
refer to the instruction manual provided with the software for details.
Notes
●
The Microphone must be connected to the Dreamcast controller. The Microphone may
malfunction or become damaged if it is connected to the expansion socket of a peripheral
device that does not support it. The Arcade Stick and Racing controller are examples of
non-supporting controllers. Do not connect the Microphone to one of these peripherals.
●
The Microphone can be connected to either Expansion Socket 1 or Expansion Socket 2 on
the Dreamcast controller. However, some software may require that the Microphone be
connected to a particular socket. Please refer to the instruction manual provided with the
software for details.
●
When connecting the Microphone to the Dreamcast controller, make sure that you push it
in all of the way in — until it locks into place with an audible click. If the Microphone is not
correctly locked into place, it could fall out during use or possibly operate incorrectly.
●
Grasp the Microphone body, not Microphone stand, when removing the Microphone from
the Dreamcast controller. Grasping the Microphone stand when removing the Microphone
from the Dreamcast controller could damage the Microphone.
Usage Precautions
