Seg SB 1200, Instruction Manual

Page: 50 / 96

2
Safety Precaution
This STB has been designed and manufactured to satisfy the international safety
standards. Please read the following safety precautions carefully before operating this
receiver.
Before installing your digital satellite receiver, all security and operating instructions should
be read carefully. The User’s Manual should be retained for future reference.
All operating and using instructions should be followed.
Never allow children to operate this electrical device without supervisor.
Main Supply:
Before operating, please check the units operating voltage is 100~240V AC 50/60Hz.
If the device or the power socket or its electrical connection is damaged, immediately
unplug the product from the mains supply socket. Do not try to open or repair the receiver
on your own! Service must be carried out only by experts at a proper service centre.
If replacement parts are required, only original components are allowed to use. The use of
unauthorised components may result in risk of fire and electric shock.
Image interfaces by programmes with a frequency of approx. 12480 MHz (DSF etc.) can
possibly be caused by cellular phones, which are located near the receiver or the antenna
cable. If so the distance between receiver and telephone should be enlarged until the
problems stop to emerge.
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power cord
or touch it with wet hand as this may result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no objects filled
with liquids, such as base, shall be placed on the apparatus.
Environment:
Protect the receiver against humidity, heat and cold. Allow 10cm space around the receiver