- 49 -
selected programmes. For example, select
programme 8, then select programme 2.
Now, if you press "
P<P
" button, programme
8 will be selected. If you press the same
button again, programme 2 will be selected
and so on.
Active window switch
In PIP and PAP modes and buttons
are used to select active window. and
cursors are used to show the mute sta-
tus osd of the active window.
2.
Programme Swap (SWAP)
This button is used to swap between the
programmes in the PIP window and main
picture if the screen layout is selected as
PIP
.
PC screen is not displayed in PIP window.
Freeze Picture
You can freeze the picture on the screen by
pressing
OK
button. Display layout should
be selected as
full screen
for this feature. At
split screen
and
PIP
layouts; this function is
invalid.
Sound Indicator
The alternatives of the indicator are
Mono,
Stereo, Dual A
and
Dual B
. This indicator is
displayed under the programme number in-
dicator on the screen. "
I-II
" button is used to
select
Mono, Stereo, Dual A
or
Dual B
.
0212
In
Mono
broadcast or in forced-mono (for
stereo broadcast).
67(5(2
In
Stereo
broadcast.
'8$/$
If dual broadcast detected.
Dual A
is se-
lected in default and also can be selected
after
Dual B
by Remote Control.
'8$/%
If
Dual B
selected by Remote Control.
Mute Indicator
It is placed in the upper left side of the
screen when enabled.
To cancel mute,
there are two alternatives,
the first one is pressing
" "
button, thus the
volume is set
to the preceding value, and the
second one is
increasing/decreasing
the
volume level, thus it starts from the previous
level to
increase/decrease.
79
,,,
6285&(
If
PIP layout
is selected, mute indicator is
displayed at the upper middle of the PIP win-
dow.
If
Split Screen
is selected, mute indicator is
displayed at the upper left side of the active
window.
02-ENG-3008W-1546 UK-VIRTUAL DOLBY-30 INCH TFT-(CHI MEI).p65
05.08.2004, 09:05
49