Seg MICHIGAN, Operating Instructions Manual

Page: 56 / 129

2
Michigan 8cm LED BLU-TV
EN
Dish Parameter description
LNB Type: LNB Frequency
Highlight the LNB Type , and use the
 
buttons or Ok
to enter submenu then you can set specific parameters.
LNB Power: Polarization switching power supply, Press

to select On/Off.
On: Allowed to receive Horizontal / Vertical Polarization
program.
Off: out-off of supply.
22KHz:
The level of the LO switch / DS switch ( Require
the user to have installed 22KHzSatellite signal switch).
Press

to select Auto/On/Off.
Auto:
Automatically issued 22 KHz pulse signal to control
switching.
On/Off: Manual control switch.
Tone burst:
Double Single Switch (Require users to install
Tone burst switch), Press  to select Burst A/Burst
B/None.
Burst A /Burst B: Manually switch the satellite A/B.
DiSEqC1.0:
4 select 1 switch ( Require the user device
support DiSEqC 1.0 protocol). Press  to select LNB1/
LNB2/ LNB3/LNB4/None.
LNB1/LNB2/LNB3/LNB4: Corresponding to a satellite ,
After selecting the corresponding list will appear in the
satellite list.