English-66
lation. Press
OK
button to continue.
Aerial Installation
If you select
AERIAL
option from the
Search
Type
screen, the television will search for digital
terrestrial TV broadcasts.
NOTE: You can press MENU button
to cancel.
After all the available stations are stored, the
Channel List will be displayed on the screen.
If you like how the channels are sorted ac-
cording to the LCN (*), please select “Yes”
and than press
OK
.
Press
MENU
button to quit channel list
and watch TV.
(*) LCN is the Logical Channel Number
system that organizes available broadcasts
in accordance with a recognizable channel
sequence (if available).
Cable Installation
If you select CABLE option and press OK
button on the remote control. To continue,
please select YES and press OK. To can-
cel operation, select NO and press OK.
You can select frequency ranges from this
screen.
Enter the frequency range manually by us-
ing the numeric button.
NOTE:
Searching duration will change
depending on the selected search step.
Satellite Installation
If you select
Satellite
option from the
Search Type
screen, you can set a satellite
and watch the satellite channels. When you
select Satellite installation,
Antenna Type
menu will be displayed.
There are three types of antenna selection.
You can select
Antenna type
as
Direct
,
Unicable
or
DiSEqC
switch by using “ ”
or “ ” buttons.
Direct:
If you have a single receiver and a
direct satellite dish, select this antenna type.
After selecting
Direct
, another menu screen
will be displayed. Select an available satellite
and press
OK
to scan for services.
Unicable:
If you have multiple receivers and
a unicable system, select this antenna type.
Press
OK
to continue. Configure settings
by following instructions on the screen.
Press
OK
to scan for services.
DiSEqC switch
: If you have multiple sat-
ellite dishes and a
DiSEqC switch
, select
this antenna type. After selecting DiSEqC
switch, another menu screen will be dis-
played. You can set four
DiSEqC
options
(if available). Press
GREEN
button to scan
all satellites or press
YELLOW
button to
scan only the highlighted satellite. To save
and exit press
OK
button.
TKGS installation
After the antenna type is selected and other
satellite settings are made, press the
Red
button to start
TKGS Installation
. You can
select to install
HD
or
SD
channels during
the installation. This selection can be done
later too using the
Preferred
List
option
under the
TKGS Installation
menu. The
selection will be activated, after switching
the TV off and back on again or after a
manual update as described below.
If wanted
TKGS Installation
can be ap-
plied manually after the
First Time Instal-
lation
. Press the
Menu
button. Select
System>Settings
and press
OK
. In the sub
menu highlight
Satellite
Settings
and press
OK
. Then select
Antenna
Installation
.
Then follow the above mentioned steps to
start a
TKGS Installation
.
The second way to apply
TKGS instal-
lation
manually after the
First Time
