SEFRAM 902406500, User Manual

Page: 47 / 78

Page 7.1
7. DATA ACQUISITION
In the « Launch » page, you must first program the data acquisition.
7.1. Launch page

Definition of the data acquisition file:

Selection of the folder

Selection of the name (beginning of the file name, the end is an incremental value)

Length of the file (maximum or selection of the number of samples per channel)

Speed:
The minimum speed is conditioned by the number of channels for acquisition. See §2.1.1

Start: Start condition of the data acquisition

Manual: by pressing a key

Trigger: on a channel or a combination of analogic or logic channels (see
§ 5)

Waiting: after a delay or at a specified date and hour

Automatic: immediate; automatic stop when the file is full.

Pre-triggering: definition of the position of the Start trigger in the data
acquisition; this position is specified as a number of samples and time

Stop: Stop condition of the data acquisition

Automatic: when the file is full

Trigger: on a channel or a combination of analogic or logic channels (see § 5)

After acquisition: action after the end of the data acquisition
Possible only if the Start and Stop triggers are not Manual