SEFRAM 902406500, User Manual

Page: 42 / 78

Page 5.4
5.1.3. Trigger on Logic Channels
After selection of the trigger on Logic Channels, the window allows you to set the trigger
condition.
The 12 logic channels can be used in the trigger word:

either active at status 0 (less than 1.6 volt)

or active at status 1 (more than 4.0 volts)

or non used X

AND / OR: the logic function AND / OR is applied to each channel

Type: edge or level: the trigger is applied on an edge (change of value) or a level