7849B
– 7859B – 7817B
p.
19
4.2
Installing a SATELLITE dish
You have two methods to install a satellite dish :
using the POINTING function
using the SPECTRUM function
4.2.1
Use of the POINTING function
The appliance gets an
“Dish pointing” mode in order to align quickly and easily your satellite dish. To access
to the
“Check Sat” mode from the HOME page, press
Select a satellite like in the example below (here Astra1):
The device successively scans 4 transponders and gives an RF indication corresponding to the level of
the signal received on the antenna and QUALITY corresponding to the quality of the signal received on
the antenna.
Uncorrectly pointed antenna
Correctly pointed antenna
No found trans
ponder → red smiley
Average reception quality (< 50%) → orange smiley
Good reception quality (> 50%) → green smiley
Slowly orientate the satellite dish until hearing the locking melody and getting the best quality
