signal, the
yellow-green
LED flashes.
3.2 The blue LED in the front（GSM signal state）
GSM
signal is normal
，blue LED
light long bright
。
No
GSM
signal,the
blue
LED
flashes
。
GSM n
o signal, flashes
（
0.2 sec/2 sec
），
Signal normal long bright;
All LEDS will turn off after 5 minutes. When there is a new call orthe power is
connected, the LEDs will relight and turn off 5 minutes later.
4.
GSM card Installation
4.1
Preparation for the installation
4.1.1 Product Check. Open the packing box and check the device‘s model and
accessories. If the model is wrong or the accessories not complete, please contact
the dealer.
4.1.2 Choose SIM card. Please insert a SIM card to the device. Please take dealer’s
advice as reference.
4.1.3 GSM installation, use a toothpick or tweezers to hold the GSM slot
switch (yellow button),then the GSM slot will pop up.Put the GSM card into
the slot
(metal side up) ,then replace the installed GSM slot (pictures as
shown below)
4.1.4
At this point can be connected to external 9-36 v power supply
Note: don't install backwards the terminal GSM card
The GSM card must be with GSM function and enough deposit.
If your GSM card need input PIN when power on, please
referr your
phone's user manual and
cancel it.
5.
How to find the car's OBD connector locations
connect the devices to the car OBD interface, as shown below:
