manualshive.com logo in svg

Seetru G27, Instructions, Page: 3 / 3

Share
Download
Seetru G27 Instructions Download Page 3

 

 

3

 
 
 
 
 
 
 
 
 
 
 
 
 

MINI GAUGE G27

 

 

 

 

Assemble as follows: 
Gland nut (4) to be placed over sight tube (1), then one ferrule (7), large O’ring (6) SXX01433, small O’ring 
(5) SXX01333, then the second ferrule (7), which should then be pushed into the collar (8) and the gland nut 
(4) to be screwed onto the collar (8) and tightened to 12Nm. 
 

Summary of Contents for G27

Page 1: ...tion to avoid undue strain on gauge 3 Fit gauge assembly up to tank ensure seals are in position on collar screw nipples item 9 into tank to seal gauge to tank Tightening torque of 12 16Nm MAX 4 Gauge may be adjusted by 2mm on nominal centre distance by slacking off gland nuts and sliding the collars on the sight tube retighten gland nuts after adjustment The gauge is now ready for service check f...

Page 2: ...uired 5 Unscrew top gland nut 4 from gauge collar 8 6 Remove top gauge collar 8 from tubes by pulling 7 Remove guard tube 2 by sliding off sight tube 8 Unscrew lower gland nut 4 from lower gauge collar 8 9 Remove sight tube 1 10 Clean or renew sight tube inspect all bushes and seals 5 6 7 renew if required 11 Check internal passages of collar and nipples are clear of obstructions 12 Refit lower gl...

Page 3: ...t 4 to be placed over sight tube 1 then one ferrule 7 large O ring 6 SXX01433 small O ring 5 SXX01333 then the second ferrule 7 which should then be pushed into the collar 8 and the gland nut 4 to be screwed onto the collar 8 and tightened to 12Nm ...

Reviews:

No comments