Email:
Mob:
00 44 7967 445829
Web:
www.SeeSense.eu
SeeSense s.r.o. Slovakia
Tel:
00421 917 163 367
PO Box 42, Kezmarok, 06001, Slovak Republic
SeeSense United Kingdom
Tel:
00 44 203 468 2250
4C Woodley Park Est, Reading, RG5 3AW, UK
Miniature Camera Solutions
IF YOU ARE IN DOUBT PLEASE DO CONTACT US.
Please contact SeeSense for further details of all the
Entaniya range and 360 VR systems we offer:
www.seesense.eu [email protected]
Rev: 1.012.0816 E.&.O.E.
14) REFIT THE LENS AND
CHECK ITS POSITION.
If it is not correct remove
the lens and repeat - loosen
the mount 11) refit and
position lens 12), retighten
13), and check position 14)
until satisfied.
15) FOR THE BEST RESULTS, IDEALLY THE VIGNETTED
CORNERS SHOULD ALL BE EQUAL.
16) WHEN HAPPY WITH
THE POSITIONING OF THE
MOUNT YOU CAN GENTLY
TIGHTEN ALL FOUR SCREWS.
Please note that the screw
threads at 12 and 6 o’clock
position can strip if over
tightened - See also Point 1)
17) REFIT THE LENS, LOOSEN
THE GRUB SCREWS ON THE
RED ADAPTER AND REFOCUS
THE LENS AS REQUIRED.
When happy retighten the
grub screws equally (similar
to tightening down a car
cylinder head!)
18) NOW YOU SHOULD
BE READY TO USE YOUR
CAMERA AND ENTANIYA
LENS.
A FEW FINAL POINTS:
- FOR CLOSER WORKING DISTANCES YOU WILL NEED TO (SLIGHTLY) REFOCUS THE LENS
- FOR MULTI CAMERA SYSTEMS YOU SHOULD ALWAYS PRECHECK THE SYSTEM AND FOCUS BEFORE USE
